Topcoats
Turbo Liner® Has a full line of top coating products that can be tinted to virtually any color.
Our top coats are designed to add durability and additional UV stability to any project.
Turbo Liner 11 TC
Turbo Liner® 11 TC Topcoat is an UV resistant plural component, 1:3 or 1:4, solvent based, quick curing, liquid applied, aliphatic polyurethane topcoat. It is designed to provide a high level of UV protection.
Features and Uses
- Features:
» Protects from Color Change
» Allows Custom Color Match
» Refinish Previously Applied Topcoats
» Coverage Rate 1 gal/350 sq. ft.
» Dry Film Thickness per Coat 5 ± 1 mils
» Pot Life at 75°F (24°C), 50%RH 6 Hours
» Hardness, ASTM D-2240 2 H
- Typical Uses:
» Finish coat over Truck Bed Liner system
» Reinforced Plastic
» Polyurethane Elastomeric Surfaces
Turbo Liner 100
Turbo Liner® 100 is a polyester, aliphatic, single component, liquid applied, moisture cured, urethane polyurea surface protection coating.
Features and Uses
- Features:
» Very Durable
» Excellent Weather-ability
» Seamless Waterproofing Membrane
» UV Resistant For Superior Gloss Retention
» Coverage Rate 1 gal/100 sq. ft. Varies with Substrate
» Dry Film Thickness, Exclusive of Aggregate per Coat 10 ± 2 mils
» Hardness, ASTM D-2240 95 ± 5 Shore A
» Tensile Strength, ASTM D-412 5500 ± 500 psi
» Ultimate Elongation, ASTM D-412 250 ± 30%
» Tear Resistance, Die C, ASTM D-624 500 ± 50 pli
- Typical Uses:
» Concrete
» Plywood
» Heavy Pedestrian Traffic
» Vehicular Traffic
» Some Types of Chemical Spills
» Re-sealing Existing Urethane Surfaces
» Most Metal, Rubber, Wood, or Masonry Surfaces
Turbo Liner 1110
Turbo Liner® 1110 is a two component, aliphatic polyester polyurethane finish coat for use in moderate to severe chemical environments in indoor or outdoor applications.
Features and Uses
- Features:
» Color and Gloss Retention
» Chemical Resistance
» Impact Resistant
» Abrasion Resistant
» Coverage Rate 0.5 gal/100 sq. ft. Varies with Substrate
» Dry Film Thickness, per Coat at 1/2 gal/100 sq. ft. 5 ± 2 mils
» Pot Life at 75°F (24°C), 50% R.H 60-75 minutes
- Typical Uses:
» Power Generating Plants
» Food Processing Facilities
» Steel Structures & Bridges
» Milling and Mining Industry
» Pulp and Paper Industry
» Storage Tanks
» Petrochemical Plants
» Aircraft Hangars
» Manufacturing Plants
» Warehouse Floors
Turbo Liner 7000
Turbo Liner® Staingard 7000 is a high solids, spray-applied, aliphatic polyaspartic polyurea with excellent retention, gloss and UV stability characteristics. It can be applied at a thickness of 8- 12 mils (20 0-300 microns) in a single pass on horizontal surfaces or multiple passes on vertical surfaces. Turbo Liner Staingard 7000 is quick curing and specifically formulated to be installed in thin film applications. Turbo Liner Products manufactures products in different VOC's ranging from 100 to 340 gms/liter to comply with VOC requirement in various regions. Make sure to use the correct grade of product which complies with VOC regulations/requirements applicable as per federal, state, statutory, counties, cities and local bodies at the place of installation.
Features and Uses
- Features:
» USDA Approved for Incidental Food Contact
» Anti-Fungal and Biocide
» Quick Cure
» Color Stable
» High Tensile Strength
» Very Durable
» Abrasion Resistant
» Excellent Weatherability
» Topcoat over aromatic polyurea, polyurethane and epoxy applications
ranging from 35°F to 130°F, service temp. from 0°F to 200°F
» UV Resistant for Superior Gloss Retention
» Hardness, ASTM D-2240 65 ± 5 A
» Tensile Strength, ASTM D-412* 3000 ± 200 psi
» Ultimate Elongation, ASTM D-412* 70 ± 50%
» Tear, ASTM D-624* 450 ± 50 pli
- Typical Uses:
» Concrete
» Plywood
» Steel
» Plastic
» Cold Storage Areas
» Industrial Warehouses
» Chemical Plants
» Off-Shore Oil Platforms
» Food Processing Areas
» Pulp and Paper Mills
» Fertilizer Plants
» Pipeline Barges
Turbo Liner 7072
Turbo Liner® Staingard 7072 is an aliphatic polyaspartic, environmentally friendly surface topcoat for waterproofing membrane systems. Turbo Liner-Staingard 7072SC is quick curing and specifically formulated to be installed in thin film applications. It is designed for use in Southern California and is in compliance with SCAQMD air quality standards.
Features and Uses
- Features:
» USDA Approved for Incidental Food Contact
» Anti-Fungal and Biocide
» Quick Cure
» Color Stable
» High Tensile Strength
» Very Durable
» Abrasion Resistant
» Excellent Weatherability
» Topcoat over aromatic polyurea, polyurethane and epoxy applications
ranging from 35°F to 130°F, service temp. from 0°F to 200°F
» For use in SCAQMD areas
» UV Resistant for Superior Gloss Retention
» Hardness, ASTM D-2240 65 ± 5 A
» Tensile Strength, ASTM D-412* 3000 ± 200 psi
» Ultimate Elongation, ASTM D-412* 70 ± 50%
» Tear, ASTM D-624* 450 ± 50 pli
- Typical Uses:
» Concrete
» Plywood
» Steel
» Plastic
» Cold Storage Areas
» Industrial Warehouses
» Chemical Plants
» Off-Shore Oil Platforms
» Food Processing Areas
» Pulp and Paper Mills
» Fertilizer Plants
» Pipeline Barges