Pure Polyurea
Turbo Liner offers quick setting, 100% aromatic and aliphatic polyurea's that can be applied to properly prepared concrete and metal surfaces.
The Turbo Liner® 5000 series is an aromatic, non-color stable whereas the Turbo Liner® 7000 series is an aliphatic and is color stable.
These coatings are less sensitive to moisture and temperature allowing applications in most environments.
Turbo Liner offers polyurea products with slower setting times. We also offer NSF approved products for potable water lining that comply with ANSI/NSF 61 Standard.
Turbo Liner 5502
Turbo-Liner® 5502 is a fast setting, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F. It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures. Turbo-Liner 5502 offers a tack free time of less than sixty seconds and exhibits 450% elongation upon curing with 50 Shore D hardness.
Features and Uses
- FEATURES
» Zero VOC (100% Solids)
» Seamless
» Excellent Thermal Stability
» Elastomeric
» Low Temperature Flexibility
» Odorless
» Good Chemical Resistance
» Meets USDA Criteria
» Coats Carbon or Mild Steel Metals Without Primer on Properly Prepared Surfaces
» Installed With or Without Reinforcement in Transitional
» Hardness, ASTM D-2240 50 ± 5 D
» Tensile Strength, ASTM D-412* 3500 ± 200 psi
» Elongation, ASTM D-412* 450% ± 50%
» Tear, ASTM D-412* 450 ± 50 pli
- Typical Uses
» Power Plants
» Refineries
» Structural Steel
» Fertilizer Plants
» Warehouse Floors
» Mining Operations
» Cold Storage Facilities
» Marine Environments
» Paper and Pulp Mills
» Food Processing Plants
» Landfill Containment
» Secondary Containment
» Parking Garage Decks
» Walkways and Balconies
» Water and Wastewater Treatment Plants » Industrial and Manufacturing Facilities
Turbo Liner 5602
Turbo Liner® 5602 is a fast set, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F. It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features and Uses
- FEATURES
» Zero VOC (100% Solids)
» Seamless
» Excellent Thermal Stability
» Low Temperature Flexibility
» Odorless
» Good Chemical Resistance
» Meets USDA Criteria
» Coats Most Metals without Primer
» Installed With or Without Reinforcement in Transitional Areas
» Hardness, ASTM D-2240 60 ± 5 D
» Tensile Strength, ASTM 412-C 2800 ± 200 psi
» Elongation, ASTM 412-C 300% ± 20%
» Tear, ASTM 412-C 285 ± 50 pli
- Typical Uses
» Airports
» Refineries
» Fertilizer Plants
» Mining Operations
» Food Processing Plants
» Marine Environments
» Secondary Containment
» Walkways and Balconies
» Water and Waste Water Treatment
» Industrial and Manufacturing Facilities
» Power Plants» Structural Steel
» Warehouse Floors
» Cold Storage Facilities
» Landfill Containment
» Paper and Pulp Mills
» Parking Garage Decks
Turbo Liner 5901
Turbo Liner® 5901 is a fast set, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F. It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features and Uses
- FEATURES
» Zero VOC (100% Solids)
» Seamless
» Excellent Thermal Stability
» Low Temperature Flexibility
» Odorless
» Good Chemical Resistance
» Meets USDA Criteria
» Coats Most Metals without Primer
» Installed With or Without Reinforcement in Transitional Areas
» Hardness, ASTM D-2240 85 ± 5 A
» Tensile Strength, ASTM D-412* 3000 ± 200 psi
» Elongation, ASTM D-412* 650% ± 50%
» Tear, ASTM D-412* 450 ± 50 pli
- Typical Uses
» Airports
» Refineries
» Fertilizer Plants
» Mining Operations
» Food Processing Plants
» Marine Environments
» Secondary Containment
» Walkways and Balconies
» Water and Waste Water Treatment
» Industrial and Manufacturing Facilities
» Power Plants» Structural Steel
» Warehouse Floors
» Cold Storage Facilities
» Landfill Containment
» Paper and Pulp Mills
» Parking Garage Decks
Turbo Liner 7502
Turbo Liner® 7502 is a fast setting, rapid curing, 100% solids, flexible, aliphatic, two component spray polyurea with excellent color retention, that can be applied to suitably prepared interior or exterior concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F. It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures. Turbo Liner 7502 offers a tack free time of less than two minutes and exhibits 220% elongation upon curing with 50 Shore D hardness.
Features and Uses
- FEATURES
» Zero VOC (100% Solids)
» Seamless
» Excellent Thermal Stability
» Low Temperature Flexibility
» Odorless
» Good Chemical Resistance
» Meets USDA Criteria
» Coats Most Metals without Primer
» Installed With or Without Reinforcement in Transitional Areas
» Hardness, ASTM D-2240 50 ± 5 D
» Tensile Strength, ASTM D-412* 3300 ± 300 psi
» Elongation, ASTM D-412* 220% ± 20%
» Tear, ASTM D-412* 400 ± 20 pli
- Typical Uses
» Airports
» Refineries
» Fertilizer Plants
» Mining Operations
» Food Processing Plants
» Marine Environments
» Secondary Containment
» Walkways and Balconies
» Water and Waste Water Treatment
» Industrial and Manufacturing Facilities
» Power Plants» Structural Steel
» Warehouse Floors
» Cold Storage Facilities
» Landfill Containment
» Paper and Pulp Mills
» Parking Garage Decks
Turbo Liner 7752
Turbo Liner® 7752 is a fast set, rapid curing, 100% solids, aliphatic, color fast, two component spray polyurea that can be applied to suitably prepared surfaces. It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most conditions.
Features and Uses
- FEATURES
» Zero VOC (100% Solids)
» Seamless
» Excellent Thermal Stability
» Low Temperature Flexibility
» Odorless
» Good Chemical Resistance
» Meets USDA Criteria
» Coats Most Metals without Primer
» Installed With or Without Reinforcement in Transitional Areas
» Hardness, ASTM D-2240 75 ± 5 D
» Tensile Strength, ASTM 412-C 3900 ± 300 psi
» Elongation, ASTM 412-C 30% ± 20%
» Tear, ASTM 624-C 550 ± 40 pli
- Typical Uses
» Airports
» Refineries
» Food Processing Plants
» Marine Environments
» Secondary Containment
» Paper and Pulp Mills
» Water and Waste Water Treatment
» Industrial and Manufacturing Facilities
» Power Plants
» Hospitals
» Structural Steel
» Parking Garage Decks
Turbo Liner 8245
Turbo-Liner® 8245 is a fast set, rapid curing, 100% solids, flexible, aromatic, two component spray polyurethane polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F. It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features and Uses
- FEATURES
» Zero VOC (100% Solids)
» Seamless
» Excellent Thermal Stability
» Elastomeric
» Low Temperature Flexibility
» Odorless
» Good Chemical Resistance
» Meets USDA Criteria
» Coats Carbon or Mild Steel Metals Without Primer on Properly Prepared Surfaces
» Installed With or Without Reinforcement in Transitional
» Hardness, ASTM D-2240 45 ± 5 D
» Tensile Strength, ASTM 412-C 1300 ± 200 psi
» Elongation, ASTM 412-C 40% ± 50%
» Tear, ASTM 412-C 230 ± 30 pli
- Typical Uses
» Power Plants
» Refineries
» Structural Steel
» Fertilizer Plants
» Warehouse Floors
» Mining Operations
» Cold Storage Facilities
» Marine Environments
» Paper and Pulp Mills
» Food Processing Plants
» Landfill Containment
» Secondary Containment
» Water and Wastewater Treatment Plants