(877) 678-8726 - 1 WEST CAMERON AVENUE - KELLOGG, IDAHO 83837

Primers

Turbo Liner® offers a family of epoxy-polyamine and aromatic urethane primers.
These products provide an excellent inter-coat adhesion to most any substrate.

Turbo Liner 12

Turbo Liner® 12 is a two component, 100% solids, liquid applied, urea polyurethane primer.

Features and Uses

Features:

» Low Oder
» Solvent Free
» 100% Solids
» Quick Drying
» Coverage Rate 1 gal/300 sq. ft.
» Dry Film Thickness per Coat 5 ± 1 mils
» Pot Life at 75°F (24°C), 50%RH 20-30 minutes
» Hardness, ASTM D-2240 70 ± 5 D

Typical Uses:

» Metal
» Glass Reinforced Plastics
» Polyurethane Elastomeric Surfaces

Turbo Liner 21

Turbo Liner® 21 is a two-component, high solids, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. Turbo Liner 21 primer is ANSI/NSF 61 approved for direct contact with potable water.

Features and Uses

Features:

» Seamless
» Elastomeric
» Recoatable
» Chemical Resistance
» Waterproof
» Meets California VOC and AQMD Requirements, Including SCAQMD Areas
» Coverage Rate 1 gal/300 sq. ft.
» Dry Film Thickness per Coat 5 ± 1 mils
» Pot Life at 75°F (24°C), 50%RH 20-30 minutes
» Hardness, ASTM D-2240 70 ± 5 D

Turbo Liner 172

Turbo Liner® 172 is a single component, liquid applied, aromatic urethane polyurea primer. This primer provides excellent inter-coat adhesion.

Features and Uses

Features:

» One Component
» Fast Cure
» Coverage Rate 1 gal/300 sq. ft.
» Dry Film Thickness per Coat 3.6 ± 0.1 mils

Typical Uses:

» Polyurethane Elastomeric Surfaces only
» Pedestrian Decking

Turbo Liner 2180

Turbo Liner® 2180 is a two component, liquid applied, epoxy polyamine primer with unique penetrating characteristics.

Features and Uses

Features:

» Seals Concrete
» Low Viscosity
» Excellent Adhesion
» Coverage Rate 1 gal/300 sq. ft.
» Dry Film Thickness per Coat 4 mils
» Pot Life at 75°F (24°C), 50%RH 60-90 minutes

Typical Uses:

» Concrete
» Metal
» Plywood
» Glass Reinforced Plastics
» Polyurethane Elastomeric Surfaces

Turbo Liner EBF

Turbo Liner® EBF is a two component, 100% solids, liquid applied, epoxy-polyamine filler surfacer with unique characteristic of sealing pores in concrete.

Features and Uses

Features:

» Low Odor
» Fast Cure
» 100% Solids
» Excellent Adhesion
» Coverage Rate Varies with Substrate
» Pot Life at 75°F (24°C), 50%RH 30-45 minutes
» Hardness, ASTM D-2240 70 ± 5 D

Typical Uses:

» Concrete
» Glass Reinforced Plastics
» Polyurethane Elastomeric Surfaces

Turbo Liner Prime-U

Turbo Liner® Prime-U is a two component, high solids, liquid applied primer with unique penetrating characteristics.

Features and Uses

Features:

» High Solids
» Fast Re-coat Time
» Low Odor
» Low Viscosity
» Turbo Liner Prime-U Accelerator can be used to speed up cure times
» Coverage Rate 1 gal/300 sq. ft.
» Dry Film Thickness per Coat 5 ± 1 mils
» Pot Life at 75°F (24°C), 50%RH 30-90 minutes

Typical Uses:

» Inter-coat Adhesion primer for existing Urethane System only